Chase Bays ブレーキバランサー

Chase Bays Brake Booster Eliminator装着時などに使用可能です。
1/8NTP→AN3 変換アダプター付属


The Chase Bays Adjustable Bias Valve is simply designed to adjust the front to rear brake bias. In most cases you want the front brakes to have more pressure than the rear for a good balance. This product is included within our very popular Brake Line Relocation Kits (with various different fittings attached). Most copycat companies of our Brake Line Relocation use the factory proportioning valve which gives substantially worse pedal feel.

It is constructed of 6061 aluminum with a delrin adjustment knob. It is anodized black with the Chase Bays logo laser etched on both sides. It has 1/8 NPT threads but does include (2) black 1/8NPT to -3AN straight adapters. We now include a Chase Bays Mounting Bracket for easier install.

Pressure adjustments range 100-1000 PSI and provide for a maximum decrease of 57% in line pressure. This adjustment allows you to fine tune the front to rear braking balance by proportionately decreasing the rear (or in some cases the front) brake line pressure. This product in most cases requires custom brake lines.

The adjusting knob rotated all the way out will provide a maximum pressure reduction of 57%. Rotating the knob in will incrementally increase line pressure, up to full pressure. If the range of adjustment in the valve is not sufficient to properly balance the vehicle’s bias, changes to other components within the system may be necessary.